Replace Your Leaking Toilet in 5 Easy Steps

8/21/2019 (Permalink)

Leaking toilet in a Hanover Township, OH home

Have You Found Yourself With a Leaking Toilet?

It may be time to get it replaced. If you’d like to tackle replacing your toilet DIY-style, grab a buddy and read on for these five easy steps.


Prep the Area


The first thing you’ll want to do to is to disconnect the water supply. Once done, drain the water from your toilet. This can be done by flushing the toilet repeatedly and then removing the remaining water with a sponge. Disconnect the water supply line from the bottom of the toilet tank.


Detach Your Old Toilet


Loosen the bolts at the base of your toilet. Using a sharp knife, very carefully pry off the caulk seal around the base of the toilet bowl. You can sway the toilet back and forth to wrench the base from the seal. The toilet can now be removed.


Prepare for Installation


Use a knife to remove the wax ring located at the base of your toilet. You may now install a new wax ring. In some instances, simply replacing this wax ring can solve the issue of a leaking toilet.


Set Your New Toilet


Caulk the bottom of the new bowl and lift it into place, guiding it securely over the hole. Secure the base with bolts. Attach the tank to the bowl.


Check Your Toilet Repair Work


Make sure your toilet is level before reconnecting your water supply. Once the tank has filled with water, give it a couple of test flushes to check for leaks or blockages. Before you call it a day, you may want to check for any water damage, mold or mildew. If you are in need of further remediation, there’s no need to do it on your own, there are experts in Hanover Township, OH, that can help!

Replacing your old, leaking toilet is a manageable task when you’re equipped with the right tools and a proper guide. Rest easy with the knowledge that as a homeowner you can undertake any task with the help of friends and professionals.